Mini Sport Remanufacturing Services
What Is Engine Remanufacturing?
Mini Sport is one of the World’s leading premier suppliers of remanufactured A series A+ engine and components for Mini. With our advanced and efficient production process, backed by over 50 years of experience, Mini Sport is able to supply remanufactured engines and components to the highest quality at extremely competitive prices. We also offer a full range of remanufactured cylinder heads, gearboxes, crankshafts, con rods, camshafts, engine blocks and flywheels, all on an exchange basis.
At Mini Sport our Engine Remanufacturing service aims to restore all original levels of performance and reliability to that of the engines original state. Our complete engine remanufacturing process undergoes 9 meticulous stages designed to deliver a high quality engine assembly to keep your Mini's authenticity.
Mini Sport Engine Assemblies
Following all quality control checks, the engine is then assembled by our skilled technicians, using new pistons including rings, crankshaft bearings, thrust washers, timing chain and tensioner (where applicable), oil pump, pressure release valve and spring, gaskets, oil seals and oil filter. All new components have been carefully selected for their durability, reliability and are sourced extensively from original OE manufacturers where ever possible. All O.E torque settings are adhered to during assembly.
The Mini Sport 9 Step Process...
Every engine and component is stripped, removing and discarding all gaskets, oil seals, bearings and pistons - ready for the next stage.
All major engine components undergo an intensive cleaning process which includes a chemical dip, high pressure spray wash system, abrasive cleaning and a final rinsing to flush all excess debris.
3. Inspection Of Parts
Following the cleaning process, parts are meticulously inspected for wear and damage. Parts are also measured for size, ovality, taper and alignment. Components that do not meet specification are replaced.
4. Cylinder Block Remanufacturing
Bolt & stud threads are cleaned. Damaged threads are replaced. Cylinder Blocks are then rebored and honed to give the essential cross hatch micro finish. All gasket surfaces are machine refaced
5. Crankshaft Remanufacturing
Crankshafts are crack tested, the journals are reground to the next undersize then micro-finish polished to exact tolerances. All surfaces are re-meausred. oil galleries de-burred and cleaned.
6. Conrod Remanufacturing
All conrod bearing housings are measured for size, ovality and taper, non-confirming items are discarded. Every conrod is checked for alignment, weight graded into engine sets, then dynamically balanced.
7. Camshaft Remanufacturing
Measured for straightness & wear. Cam profiles are then reground to the original valve timing/lift specifications. Camshafts are finally heat treated by a nitrocarburising process for a longer service life. The journals can then be polished if required for finish.
8. Cylinder Head Remanufacturing
The cylinder heads are cleaned to ensure all carbon deposits are removed.Valve guides are renewed, valve seats are recut or replaced and examined. Cylinder heads are painted with high temperature engine paint.
9. Rocker Assembly
The complete rocker assembly is stripped, cleaned, checked and machined where necessary and then rebuilt using a new rocker shaft.
Contact Mini Sport Today
Please select the purpose of your enquiry